Description
- Horizontal windlasses
- Maximum flexibility of installation
- AISI 316 Stainless steel and chromed bronze
- Integrated sensor and magnet for chain counter
- Rope and chain on a single gypsy
- Automatic system of anchor-rode free-fall
- Supplied with chain guide device
- Supplied with pressure lever
- Right gypsy fitted in a mounting bracket.
- Watertight motor IP67 (IP66 BL3 600)
- Anodized aluminium gearbox (1500 W)
- Technopolymer gearbox (600 W / 900 W / 1000 W)
Balder FF is the ideal windlass to be installed at the stern thanks to the special mounting kit. However it also adapts perectly to any requirement and allows several combinations.
| GYPSY | 6 mm | 8 mm – 5/16″ | 10 mm – 3/8″ | |||||
| CHAIN | 6 mm | 6 mm | 8 mm | 8 mm | 5/16″ | 5/16″ | 10 mm | 3/8″ |
| DIN 766 | ISO | DIN 766 | ISO | G4 | BBB | ISO (P.30) | G4 |
Supplied accessories standard
| Mounting Bracket |
|
Contactor units |
Nylon handle |
Mounting |
||||||||||||||||||||||||||
|
Optional accessories
| The Automatic Stop kit allows you to automatically stop the anchor on its way up leaving it in its stowed position. The Automatic Stop is a simple system composed of a thru-hull fitting equipped with a sensor and a composite shell, that is easily fixed to the leaded rope, equipped with magnets. The rope will run freely until the magnets don’t get in contact with the sensor which again will automatically stop the motor by interrupting the electrical circuit.
|
|
|
||
|
Safety stopper for chain |
Thru-hull |
Wall plate |
|
Hydraulic magnetic |
UP/DOWN |
UP/DOWN Switches |
handheld |
Chain Counter |
Radio remote |
| Base Model | BL3 P FF 900 X | |
| Motor power | 900 W | |
| Motor supply voltage | 12 V | 24 V |
| Maximun pull | 850 Kg 1864 lb |
850 Kg 1864 lb |
| Maximum working load | 250 Kg 551.1 lb |
300 Kg 661.4 lb |
| Working load | 80 Kg 176.4 lb |
100 Kg 220.5 lb |
| Absorption @ working load | 90 A | 55 A |
| Maximum chain speed | 27,4 m/min 89.9 ft/min |
26,4 m/min 86.4 ft/min |
| Chain speed @ workink load | 14,4 m/min 47.2 ft/min |
14,8 m/min 48.5 ft/min |
| Weight | 18,8 Kg 41 lb |
18,8 Kg 41 lb |
| Boat length | 5-9 m 16-29 ft |
5-9 m 16-29 ft |
Dimensions
Supplied accessories standard
| Mounting Bracket |
|
Contactor units |
Nylon handle |
Mounting |
||||||||||||||||||||||||||
|
Optional accessories
| The Automatic Stop kit allows you to automatically stop the anchor on its way up leaving it in its stowed position. The Automatic Stop is a simple system composed of a thru-hull fitting equipped with a sensor and a composite shell, that is easily fixed to the leaded rope, equipped with magnets. The rope will run freely until the magnets don’t get in contact with the sensor which again will automatically stop the motor by interrupting the electrical circuit.
|
|
|
||
|
Safety stopper for chain |
Thru-hull |
Wall plate |
|
Hydraulic magnetic |
UP/DOWN |
UP/DOWN Switches |
handheld |
Chain Counter |
Radio remote |
Reviews
There are no reviews yet.