Description
Victron BatteryProtect BP100 disconnects the battery from non-essential loads before it becomes completely discharged. It can be set to disconnect at several different voltages and a digital display is built in to indicate what setting has been selected. An alarm signal is also built in that can be used for an external buzzer/warning light, this alarm is triggered 90 seconds before disconnect. The battery protector unit automatically detects the system voltage (12V/24V) and has over-voltage protection built in. Continuous load rating 100A.
NOTE: The battery protect can be used with all types of battery technology.
– Alarm output delay: 12 seconds
– Maximum load on alarm output: 50mA (short circuit proof)
– Load disconnect delay: 90 seconds (immediate if triggered by the BMS)
– Load reconnect delay: 30 seconds
Key Features
12/24V auto ranging
Programming made easy
Special setting for Li-ion batteries
Ultra low current consumption
Over voltage protection
Ignition proof
Delayed alarm output
Delayed load disconnect & delayed reconnect
| Consumption | On: 1.4 mA, Off / Low Voltage Shutdown: 0.9 mA |
| Height | 48mm (1.9″) |
| Operating Temperature | Full Load: -40°C to +40°C (up to 60% of nominal load at 50°C) |
| Rating | Electronics: IP67 (potted), Connections: IP00 |
| Voltage | 6V – 35V DC |
| Weight | 0.5kg (0.6 lbs) |
| Width | 55mm (2.2″) |
| Brand | Victron |
| Country of Origin | Netherlands |
| Connections | M8 |
| Torque | Mounting: 9 Nm |
| Amps | Max. continuous: 100A, Peak (during 30s): 600A |
| Depth | 106mm (4.2″) |
Reviews
There are no reviews yet.